|
Lowering Device Accessories
|
 |
|
Last Updated ( Wednesday, 06 April 2011 )
|
|
Cemetery -
Cemetery Equipment
|
Casket Lowering Device Drapes
Device drapes are available in burgundy, blue and green Hi-Lustre drapery material. All device drapes come with velcro straps for attachment to stand tubing. Drapes are four pieces unless the one-piece wrap around feature is specified. Two styles are available:
Single-Faced
Designed for our non-telescoping device stand.
Double-Faced
Twice the thickness of Single-Faced drapes, the plush side of the material is visible both on the outside and the inside of the drape. Available for non-telescoping stands and telescoping stands. Our Double-Faced drapes for telescoping stands are equiped with an internal spring mechanism which allows them to be tapered to conform to the uneveness of the ground in a hillside setup.
Casket Lowering Device Stands
Diagrams:
Regular Device Stand Diagram
Telescoping Stand Diagram
Frigid lowering device stands are available in two models: Regular or Telescoping. The Regular model stands 14" high while the Telescoping model is fully adjustable. Designed to cope with a hillside setup, one end of the Telescoping stand adjusts from 10" - 18" while the other end adjusts from 14" - 26". The Regular model stands are available with polished aluminum corner post tubing or stainless steel tubing. The Telescoping model stands are available with nickel-plated corner post tubing or stainless steel tubing. All other tubing on our stands are made from polished aluminum. The Regular model weighs about 50 lbs. and the Telescoping model weighs about 95 lbs.
Casket Lowering Device Straps
Nylon Straps
Frigid lowering device straps are 4" wide and are available in both green and black poly heat-sealed webbing in any length desired.
Standard lengths are as follows:
- 15' for 6 foot graves
- 17.5' for 7 foot graves
- 20' for 8 foot graves
- 22.5' for 9 foot graves
- 25' for 10 foot graves
- 27.5' for 11 foot graves
- 30' for 12 foot graves
- Custom sizes > 30' (any length)
Our straps have a proven breaking strength of 2000 pounds each. For a small fee we can double-ply the center yard of each long strap for added strength if desired. Just ask for reinforced straps when you order. They can be purchased in pairs (2 long) or in sets (4 short, 2 long).
Safety Straps
Our safety straps are made of the same poly heat-sealed nylon webbing as our normal lowering device straps with rubber covered hooks on both ends. Overall length of hook and strap is 56". Strap alone measures 48". Available in pairs.
Safety Chains
Safety chains are for those who want absolutely no risk of any mishap when lowering a casket. Each of the two steel machine chains are rated at a 545 pound load capacity. Overall length of hook and chain is 68". Chain alone measures 54".
Cotton Hand Straps
Our hand-held straps are made of heavy-duty cotton webbing and are metal-tipped. They can be used for added security in combination with a lowering device, or alone if desired. Available (1.5" x 20'), (2" x 20') or (2" x 30')
Casket Placer Arm Set
Rubber covered rollers aid pallbearers in smoothly positioning the casket over the lowering device. The adjustable end stop ensures the casket will not roll off the device once positioned. Our placer arm set includes 4 placer arms with molded rubber rollers, 1 end roller with molded rubber roller, 1 end stop and 2 guide rods. Each of these items can also be purchased individually.
Caska-Rol Placer
The Caska-Rol Placer combines top-quality construction with safety and convenience. Its sturdy rubber rollers have been spaced precisely so that all standard caskets will roll smoothly without drag.
3 Simple Operating Steps:
1 Lay the three Caska-Rol bars across the side rails. For convenience the brake bar should be in front. The three bars can be placed at any interval along the device wherever they best suit your needs.
2 Place the casket on the front rollers with the brake off. Then push the casket along until it rests in the proper position on all three bars. Tighten the brake.
3 At the conclusion of the service, tighten the straps of the device and, while one end of the casket is raised, remove two of the bars. Repeat this procedure at the other end removing the last bar.
Aluminum Grave Frame
This item has been discontinued
Cemetery Grass Sets
Our grass sets are made of an indestructible, non-absorbent fibrous material that is extremely easy to keep clean. The following styles and sizes are available:
Mound Cover and Border Set (no liner)
12' x 14' mound cover (in 2 pieces), two 3' x 8' pieces, two 3' x 9' pieces.
Grave Border
two 3' x 8' pieces, two 3' x 9' pieces.
T-Style Liner-Border Combo
two 6' x 8' side pieces and two 3' x 9' T-end pieces with 3' x 3' drops.
Mound Cover
12' x 14' cover (in 2 pieces).
T-Style Set
12' x 14' mound cover (in 2 pieces), two 6' x 8' side pieces and two 3' x 9' T-end pieces with 3' x 3' drops.
Lowering Device Head Covers
Sturdy black plastic covers fit snugly over the heads of your lowering device to protect them from scratches and tarnish. Set of 4 includes 3 solid covers and 1 cover with a hole for the crank handle. Felt pads inside the covers provide further protection. Available for Imperial style devices and Standard style devices.
Also available are canvas head covers for Imperial style devices and Master style devices. Our canvas head covers feature an adjustable velcro strap to ensure a snug fit.
|
|
Last Updated ( Wednesday, 06 April 2011 )
|
Take advantage of deep discounts on over 130 products in our end of year inventory clearance sale.
Clearance Sale Catalog (Updated 2/8/12)
Latest News - Frigid Fluid Co.